DLOF Series Oil Pleated filter cartridge
1.Filter Media:PP,PET,Glass Fiber
Oil Series Pleated filter cartridges
DLOF Series Pleated Filter cartridges are manufactured to exact standards and are used in the most demanding industrial environments. Manufactured in a range of length options and micron ratings. Media has a fixed pore construction of high qualityFibres. The combonation of surface and depth filtration provides a long lifetime. Due to use of the premium quality filter fabrics, the pleated filter cartridges have superior flow characteristics with very low pressure drop compared to depth media of similar micron rating. Due to large filter area and design, allow the use of a reduced number of cartridges. Your advantage is a smaller filter vessel, less footprint and lower capital investments. The pleated cartridges have a very large filtration area and therefore a very high dirtholding capacity. Long cartridge lifetime means lower operational condumable costs, Less work changing the cartridges and less waste and the Fully thermal welded construction can be used safely on High temperature Oily water,solvents,acid and diesel.
Oil & Gas Ind
Large filter area and depth filtration provides a long lifetime of pleated filter cartridge.
Low cost because of large filter area and reduces labor costs to change
The Absolute glass fiber media supplies optimal eddiciency of solids removal.
DLOF*#=+x(e.g.,DLOF40PP5EI = 40" PP,5um,Seal Material:Silicone,-226/Flat End
Code =Rating (End Cap colour)
1 1um (Light Green)
2 2um( white)
5 5um (Orange)
Code * Length
Code #filter media
Code + seal material
Code X end cap types
II -222/flat end
|Inside Diameter :||28mm|
|Filter Media :||PP , PTE,Glass Fiber|
|End Cap Material,Center Core :||PP|
|Seal Material :||Silicone, EPDM, NBR, Viton|
|End Cap Types :||DOE,-226/Flat End|
|Removal Rating :||1μm,2μm,5μm,10μm,20μm,50μm|
|Operating Pressure and temperature :||The pleated cartridge construction will withstand differential|
Pressures up to 60 PSI(4Bar) at ambient temperature.
The optimum changeout differential pressure is 35psi(2.5Bar) up to 52°C.
|Service condition :|| 500KPa(5Bar)by 20°C|
Beta: 5000(99.98% removal efficiency) for glass fiber media.
Construction: Fully thermal welded.