Galin/Gema 800ml/500ml Powder Spray/Paint/Coating Cup connection (1002094)
for Gema Test/Lab Opt2c cup
for Gema Test/Lab Opt2c cup
| GALIN POWDER COATING CUP COMPLETE LIST | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
Galin/Gema powder coating cup(1002 069) can be used for Gema Original Machine OPT2C
Galin/Gema powder coating cup(1002 069) can be used for Gema powder coating gun GM03
Galin/Gema powder coating cup(1002 069) can be used for Gema powder coating gun GA03
Galin/Gema powder coating cup(1002 069) can be used for Gema powder coating control unit CG07
Galin/Gema powder coating cup(1002 069) can be used for Gema powder coating control unit CG06
Galin/Gema powder coating cup(1002 069) can be used for Gema Manual Test/Lab powder coating system
Galin/Gema powder coating cup(1002 069) can be used for Gema powder coating gun GM03
Galin/Gema powder coating cup(1002 069) can be used for Gema powder coating gun GA03
Galin/Gema powder coating cup(1002 069) can be used for Gema powder coating control unit CG07
Galin/Gema powder coating cup(1002 069) can be used for Gema powder coating control unit CG06
Galin/Gema powder coating cup(1002 069) can be used for Gema Manual Test/Lab powder coating system
CLEANING AND MAINTENANCE OF POWDER COATING MACHINE
- Daily Maintenance
a. Clean the injector
b. Clean the powder gun
c. Clean the powder hose and suction unit
b. Clean the powder gun
c. Clean the powder hose and suction unit
- Weekly Maintenance
a. Clean suction unit,injector,Powder Clean module and powder gun
b. Check the control unit grounding connections to the coating booth bolts,
the suspension devices of the work pieces,or the conveyor.
TROUBLESHOOTING GUIDE OF POWDER COATING MACHINE(OPTFLEX-2B)
If the powder gun does not spray powder although the control unit is switched on,then the injector can be dirty or clogged.
b. Check the control unit grounding connections to the coating booth bolts,
the suspension devices of the work pieces,or the conveyor.
TROUBLESHOOTING GUIDE OF POWDER COATING MACHINE(OPTFLEX-2B)
If the powder gun does not spray powder although the control unit is switched on,then the injector can be dirty or clogged.
| Error/cause | Troubleshooting |
| Injector nozzle, non-return valve unit, powder hose or powder gun are clogged | Clean the corresponding parts and if necessary,replace them |
| Conveying vacuum too low | Increase the powder quantity and/ or total air volume on the control unit |
| Insert sleeve worn , not or incorrect inserted | Replace or insert it ,observe the indexing cam |
| Insert sleeve is worm after a short operating duration | Clean the nozzle ,if damaged,replaced it |
| The gun does not spray powder although the control unit is switched on and the gun trigger is pressed | 1.Connect the machine to the compressed air 2.Clean /Replace 3.Clean the corresponding 4.Contact Galin representative |