Industrial Cartridge Filtration System Laser Welded Dust Collector

Industrial Cartridge Filter System Laser Welding Dust Fume ExtractorPart 1: Why use industrial dust collectorWith the development of science and technology, the degree of automation is increasing. From flame cutting to plasma cutting, laser cutting and other production techniques have been continuously promoted and popularized.

Featured Products

Industrial Cartridge Filter System Laser Welding Dust Fume Extractor
Industrial Cartridge Filter System Laser Welding Dust Fume Extractor

Part 1: Why use industrial dust collector
With the development of science and technology, the degree of automation is increasing. From flame cutting to plasma cutting, laser cutting and other production techniques have been continuously promoted and popularized. And these efficient production technologies have also led to more and more serious pollution problems, resulting in more dust in the workplace. Dust remover is imperative before cutting technology is effectively promoted. The cutting gun on the cutting frame can be installed more, and the cutting ability and cutting thickness are continuously increased, more and more harmful smoke and gas produced by the flame. The efficiency of plasma cutting and the continuous increase of cutting thickness make the cutting smoke rising to a surprising extent. Laser cutting produces more subtle soot that is often overlooked, but that is more harmful to the human body. Choose a removal system with good dusting effect and low cost, it is not only the initial investment of the equipment, but also the stability and energy saving that the system runs. We can provide the most effective solution according to the actual situation of the customer, and minimize the harm of cutting smoke.

Part 2: Techinical discription
Welldone laser cutter dust collector adopts air door type dust collection method.  The cutting table is separated into several areas. Each air have it valve to control it open or close. When the cutting head working on certain areas, this area control valve will be open. The fume during cutting in this area will be sucked and filter.  The air door type dust collection system is widely used in table laser cutting machine.  

Industrial Cartridge Filter System Laser Welding Dust Fume Extractor


Part 3: WLC series laser cutter dust collector  feature

Laser fume extractor includes fan, generator and filter unit which is compact structure, smaller floor area, low noise processing equipment. It fully combined with the user's long-term use of feedback, new design patents which make site use and maintenance more convenient and humane.
Exterior design
Industrial esthetics design, the overall incline of the hard design style. The strong sense of military-style appearance shows the good quality and rigorous process of the equipment. The whole of the light color system makes the vision more clear, and it eliminates the dull and depressing that the mechanical equipment brings, it is more friendly of the man-machine operation.
Engine block structure
All structures are made of high quality cold-rolled steel plate, and the laser cutting is used to press the forming process. The structure design is reasonable, compact and durable. The body adopt corrosion resistant spray treatment, it can be used in all kinds of harsh environment, and it is durable. In the case of potential fire hazard, the spark catcher can be installed to prevent the spark from entering the inside of the device.
Filter unit
The dust deflector can be used to protect the air flow and the filter core from the damage of large particles. The filter unit adopts the vertical cover type filter core to quickly install the method to facilitate the removal and maintenance of the filter core The filter unit adopts the quick installation that is vertical end cover type filter. It can be more easier to install and maintain. Vertical filter core make cleaning the ash more thoroughly. The filter core has larger filtration area, lower wind speed and longer life. The filter element adopts imported polyester coated filter material with good air permeability and 99.9% filtration precision that can meet emission requirement.
Fan unit
Fan impeller: the blade and wheel cap is formed integrally through pressing. It is precision positioning, high performance of aerodynamics, high efficiency, low noise and stable performance. Balance level<=4.0(National standard).
Imported motor:
The energy consumption and the rate of the heating is 10% lower than the domestic motors at the same condition. It is low noise with the inner muffler when it working. The min. noise can reach 65db. The noise of different power filters is slightly different.
Control system
The outside hanging design of the control system can be installed according to the requirements of the operating environment of the equipment. The installation position is more flexible, which reduces the pollution of the internal dust to the electrical components and extends the service life. The control system adopts PLC automatic control. According to the difference working condition, our professional engineers can specifically run the program.

Part 4: Techical parameter of Industrial Cartridge Filter System Laser Welding Dust Fume Extractor
ModeWLC-4YTWLC-6YTWLC-9YTWLC-12YTWLC-16YT
Voltage/Phase/frequency380V/3PH/50HZ380V/3PH/50HZ380V/3PH/50HZ380V/3PH/50HZ380V/3PH/50HZ
Air volume4000m³/h6000m³/h9000m³/h12000m³/h16000m³/h
Engine power5.5kw7.5kw11kw15kw18.5kw
Filter efficiency99.99%99.99%99.99%99.99%99.99%
Filter4-Φ324*860mm6-Φ324*860mm9-Φ324*860mm12-Φ324*860mm16-Φ324*860mm
Anti-blow valve quantity4691216
Ash bucket capacity40L60L60L114L2*81L
dB<75db<75db<75db<80db<85db
Compressed air requirement0.5-0.6MPa0.5-0.6MPa0.5-0.6MPa0.5-0.6MPa0.5-0.6MPa
Outside demension1100*1100*2600mm1200*1320*2720mm1450*1450*2720mm1550*1690*2870mm1980*1690*2870mm
Air intake demensionΦ350mmΦ380mmΦ450mmΦ550mmΦ600mm
OptionAnti-explosionAnti-explosionAnti-explosionAnti-explosionAnti-explosion
OptionFrequency conversionFrequency conversionFrequency conversionFrequency conversionFrequency conversion
OptionWireless remote controlWireless remote controlWireless remote controlWireless remote controlWireless remote control
OptionActivated carbon filtrationActivated carbon filtrationActivated carbon filtrationActivated carbon filtrationActivated carbon filtration

Part 5: Application cases pictures
Industrial Cartridge Filter System Laser Welding Dust Fume Extractor
Industrial Cartridge Filter System Laser Welding Dust Fume Extractor
Industrial Cartridge Filter System Laser Welding Dust Fume Extractor

Part 6:  Why choose Welldone? 
1.Patent design,  CE, ISO9001, ISO14001, and OHSAS18001 certificate approved.
2.Fine details design, like 2-3mm thickness metal, 80mm noise damping cutton...
3.Advanced patent design filter,  0.02-99.9% efficiency,  8000h lifetime. PTFE coated, Import from Japan. easy pass government inspection
4.Famous machine components.
5.3 years warranty on fan and motor, 1 years warranty on filter
6. Manufacture directly sales, lower price, better services and easy maintance.
.......

Part 7:  Company introduction
Industrial Cartridge Filter System Laser Welding Dust Fume Extractor



Quickly contact us if you are interested in our products:
Tel: +86 0731-86398162
 
Welldone Environmental Protection Equipment (Changsha) Co., Ltd
Website: welldoneexport.en.made-in-china.com

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours